Training of new machine operators connected with the making an installation PVC diameter 160 mm. Customer decided to buy the MAX K180S with Tool for inserting PE/PVC pipes diameter 160 mm. An alternative to this set would be MAX K130S + Calibrator Ø180. But for frequent installations pipes diameter 160 mm we suggest MAX K80S because using MAX K180S you can install pipe Ø160 mm during one operation. Using MAX K130S + Calibrator, you need two operation: The first one is a making hole diameter 130 mm, the second is inserting pipe using calibrator.
![ilustracja](http://terma-max.com/upload_images/IMGCC9C.tmp.JPG)
Excavation was only used for making holes: start pit and end pit.
![ilustracja](http://terma-max.com/upload_images/IMGFEB4.tmp.JPG)
![ilustracja](http://terma-max.com/upload_images/IMG5646.tmp.JPG)
![ilustracja](http://terma-max.com/upload_images/IMG96EF.tmp.JPG)
The mole with Tool for inserting PE/PVC pipe, has been set in the start pit. The pipe Ø160 mm has been connected to the mole. An optical set was used to set the trajectory.
![ilustracja](http://terma-max.com/upload_images/IMG4342.tmp.JPG)
![ilustracja](http://terma-max.com/upload_images/IMGA1D6.tmp.jpg)
After several minutes, the machine arrived to the End pit, hitted in the target - Measuring rod.
![ilustracja](http://terma-max.com/upload_images/IMGC8A9.tmp.jpg)
Accuracy 100%, horizontally and vertically. All our machines are known for their highest accuracy. Ground rockets with stepped head makes the installation little slowly. But they provide much greater accuracy.
Length: about 12 meters Depth: 2 meters Time: about 15 minutes
BACK |